Departments | Sportsman’s Corner
Joe Byers
Pre-Season Bow Setup
Joe Byers
“That big buck is dead. It just doesn’t know it yet,” laughed Jeff Harrison, the Mid-Atlantic big buck specialist, as he flashed a picture of a big velvet antlered buck. Harrison takes one or two record book bucks each year, and frequently tags the first one on opening day. I joined him at the Jefferson Archery shop as he began setting up his fall hunting bow.
Like many proficient archers, Harrison tweaks his equipment at home, yet welcomes the specific tools an archery pro shop offers. Also, staff pros like Courtney Blank can “eye-ball” a set-up in a heartbeat because of their experience.
Harrison had a 2008 BowTech General with a split riser and InVelvet coating, which is a rubber-like finish that helps dampen vibration and otherwise quiet the shooting experience.
Installing a rest was the first order of business, and this set-up included the popular Whisker Biscuit. Most shops recommend setting the arrow center 13/16th of an inch from the riser and nocked with the arrow level, rather than nock-high. Step two was to add a string loop, which increases the life of the bow string and makes the release of the arrow more forgiving.
Joe Byers
Blank used a pair of loop pliers made by Viper—a tool specifically designed for creating string loops. Don’t skimp on loop material, either. Perhaps you can rig one from discarded bow string, but nylon loops are inexpensive and won’t pull out or fray when the ends are melted.
The sight is the next element. Harrison recommends using the concentric circle concept when selecting a pin sight. The human eye naturally centers an object in a circle, (the basic principle of the peep sight in firearms) and this concept works doubly well for archers. Select the largest peep sight available and a sight with a round pin guard. This way your mind will naturally center the pin guard concentrically inside of the peep hole. After you practice it a few times the concept comes naturally.
The range of your game and type of hunting will determine the number of pins to use. If you are primarily a treestand hunter, consider a pendulum sight that automatically compensates for yardage as you tilt the bow downward. With a speedy arrow, even a single pin can be effective to 30 yards. Harrison chose the Sword sight for its nearly indestructible fiber optics and a clearly visible bubble level to help keep the bow vertical.
Once the bow is equipped, arrows are the next choice, but the question is “heavy or light weight?”
“A lot of people get hyped over heavy arrows, but I think the choice between speed and mass is a wash with today’s fast bows,” Harrison said. “I’ve taken 40 deer in the past five years shooting a 330-grain arrow without a problem. I like the added speed for judging distance. If you are three to five yards off, you don’t miss the bottom of the deer.”
Joe Byers
Finally, Harrison recommends group tuning. Begin with paper tuning in the shop, but shoot a group at 20 yards. Once you get decent groups, draw a vertical line on the target and move back to 40 yards. If your group moves to the right, adjust the rest to the left, like a rifle scope adjustment. “Tight groups won’t come immediately, but group tuning will catch what paper tuning may miss.”
Tune your gear now. In summer, a pro shop will give you lots of time and attention. Wait until September and it’s “take a number and stand in line.”
—Joe Byers